Network construction
(a) Installation location
(b) AIRSTAGE Edge Controller
Connect to the Internet using LAN1. Connect to Split System, Roof top unit and Ventilator via LAN2. LAN2 does not connect to the Internet.
(c) HUB
Use this if necessary.
(d) Router
(e) AIRSTAGE Cloud Site Manager (on the Internet)
(f) Remote location
(g) Devices
Internet access is necessary.
(h) VRF
Connect to VRF via "X1" and "X2" connection ports on the AIRSTAGE Edge Controller.
(i) Split system
Connect to Split System via UTY-TFSXJ3 and UTY-TFSXH3.
(j) Roof Top Unit
Connect to the Roof top unit via the VT8650 series Smart thermostat.
(k) Ventilator
Connect to Ventilator via wired LAN hub.
(l) Wireless LAN access point
This is required when connecting to Split system and Roof top unit.