Register the connected device to Site (for VRF system)

Select the button (a) of "Devices" on the Site dashboard screen.
The menu items will appear.
Select "VRF SCAN" (b).
The "VRF Scan" window will appear.

Select the button (d).
The scan will start, and the connected devices will be registered automatically.
If the VRF system has a large number of devices, it may take over 30 minutes.

If you want to close this window without scanning, select the button (c).

You can arrange the setting of the scan. For details, refer to "Detect the connecting devices (VRF Scan)".

NOTES:

Once pressing the button (d), the scan continues even if you close this window. To check the progress of the scan, open this window again.
During the scan, you cannot control the devices which are scanned already.

During the scan, [Stop Scan] is displayed on the button (d). To stop the scan, select the button (d) again.

Now the initial setup is complete.