Multi Timer
Tap (a) to check and edit the details of the Multi Timer.
Checking the Multi Timer
The Multi Timer setting screen is displayed.
<Displayed items>
(a) | Timer mode | Indicates whether the timer is set to work “Only once” or "Repeat daily”. |
(b) | Time | Displays the time at which the timer is set. |
(c) | Timer type | Displays the type of the setting timer. |
Editing the Multi Timer
Up to four timers can be set for the Multi Timer.
- Tap (a) to display the timer mode screen.
Tap [Only once] (b) or [Repeat daily] (c) to set the timer mode.
(To cancel all setting timers, tap [Cancel all timers].)- When one of timers 1 to 4 is tapped, the timer edit screen is displayed.
Tap the item you want to edit.
<Items that can be edited>(d) Reserve
Tap to switch between reservation and no reservation. (e) Time
Tap to edit the time at which the timer is enabled.
Hours can be edited in 1-hour increments.
Minutes can be edited in 10-minute increments.(f) Operation
Tap to change operation ON/OFF.
ON: Operation starts at the set time.
OFF: Operation stops at the set time.Tap [OK] (g) to return to the multi timer setting screen with the edited contents saved.
Tap [] (h) to return to the multi timer setting screen without changing the contents.
*Edited timers are not set until the multi timer setting is completed.- When the timer editing is finished, tap [OK] (i) to complete the multi timer setting.
As the confirmation screen will be displayed, tap [OK] to send the settings to the indoor unit. Tap [Cancel] to close the confirmation screen.
Tap [] (j) to return to the timer setting screen.
Canceling the Multi Timer setting
Cancel all timers set in the multi timer.
NOTE |
Even if the timer is cancelled, the time and ON/OFF settings for timers 1 to 4 are saved. This is useful for stopping timer operation temporarily. |
- Tap (a) to display the timer mode screen.
- Tap [Cancel all timers] (b) to display the confirmation screen.
Tap [OK] to set all set timers to “No reservation”.
Tap [Cancel] to return to the timer mode setting screen. - Tap [OK] (c) to complete the multi timer setting.
As the confirmation screen will be displayed, tap [OK] to send the settings to the indoor unit. Tap [Cancel] to close the confirmation screen.
Tap [] (d) to return to the timer setting screen.