The RLS3H systems are packed with features specifically created to save you money - like Energy Saving Program, or ESP, a programmable remote control and inverter technology.

Base Freeze Prevention

RLS3H outdoor models are equipped with a base heater that prevents condensate from freezing. The cultivated base design discharges melted water through many holes. Without a heater, freezing condensate can cause noise, damage to fan blade, condenser, and system performance.

Base Pan Heater

Condition:

Indoor temp. of 68°FDB / outdoor temp. of 5°FDB, Heating mode, High airflow volume. Operation for 24 hours.

• Equipped with a base heater that prevents condensate from freezing
• Cultivated base design discharges melted water through many holes.
• Without a heater, freezing condensate can cause noise, damage to fan blade, condenser, and system performance.

Powerful Heating Down to -15°F Outdoor Temperatures

Heating capacity at low outdoor temperatures was improved by adopting a large heat exchanger and a high capacity compressor. Rated heating capacity is maintained up to 20°F. This new model can operate down to -15°F.

Programmable Remote

Weekly timer can be easily set by wireless remote controller. ON, OFF can be set up to 4 times in one day and up to 28 times in one week. For other modes, program timer and sleep timer can also be selected by pushing a single button.

Quiet Operation

Ductless heat pumps and air conditioners are comprised of an indoor and outdoor unit, allowing for a peaceful inside environment by enabling components like compressors and motors outdoors to be installed outside.

Highly Efficient

Since mini splits have little to no ducting, they forego those energy losses typically associated central forced-air systems. Duct losses can easily account for more than 30% of energy consumption, especially if the ducts are not sealed tight or in an unconditioned space such as an attic or crawlspace. With ratings as high as 33.0-SEER (Seasonal Energy Efficiency Ratio), systems 9RLS3, 12RLS3 and 15RLS3 are among the highest rated efficiency equipment available anywhere!

Inverter Technology

Through advanced technology, Inverter air conditioners are more economical to operate and quieter to run than conventional units. They can handle greater extremes in temperature, are smoother and more stable in operation, and reach the desired temperature more quickly than conventional air conditioners.

The Inverter component allows the outdoor unit to vary its speed and output to match the required capacity of the indoor unit. Thus, the Inverter model can achieve 30% more operating efficiency than conventional models and therefore, is much less expensive to run.

Other Standard Features Include:

Wireless Remote Control

Sleep Timer

Weekly Timer

Dry Mode

Auto Louver

Auto Mode

Quiet Mode

Economy Mode

Low Noise Mode (Outdoor)

Program Timer

Auto Restart/Reset

Auto Changeover*

Low Ambient

Apple Catechin Filter

Ion Deodorizing Filter

Minimum Heat (50°F/10°C)

Powerful Operation Mode

* Auto Changeover (Heating to Cooling or Vice Versa)：

automatically alternates between heating or cooling if the room temperature falls 4°F below the set temperature when cooling or rises 4°F above set temperature when heating. Auto changeover is not designed to provide rapid changes between heating and cooling operation or simultaneous heating and cooling.